SONAX PROFILINE PerfectFinish 1000 ml 02243000

• Genuine Sonax
• Optimum care for your car
• 1.0 litres

The original Sonax PROFILINE Perfect Finish offers optimum care for your car. Specially developed for 1-step polishing of locally sanded-out imperfections in paint shops. Special extremely fine but hard abrasives enable good scratch removal with optimum gloss without causing holograms or buffing marks on the paintwork. Removes sanding up to grit size P2000. Silicone-free. Alternatively, it can also be used with an eccentric if only finishing is required.

Application: If necessary, sand the paint beforehand with P2000 grit sandpaper (or finer) or pre-polish with CutMax (02463000) or Ultimate Cut (02393000).
Use a speed-adjustable rotary polisher with FoamPad medium (04930000) or FoamPad soft (04932410). Always place the pad flat. Machines can be operated with medium to light pressure. Never polish completely dry. Carry out several individual polishing steps with the addition of small amounts of polish instead of one long polishing pass. Wipe off polish residues with a soft touch microfiber cloth (04510000) using light pressure. Always check the polishing result in between by wiping with PROFILINE Prepare (02373000) on a MF cloth soft touch and then illuminating with a hologram lamp. Alternatively, it can also be used with an eccentric if only finishing is required.
Clean polishing pads regularly and never use different polishing agents on one pad. Do not use on hot surfaces.

• Original Sonax Profiline
• Contents: 1000 ml
• Especially developed for 1-step polishing of locally sanded defects in paint shops
• Removes sanding up to grain size P2000
• Silicone-free